Steel Testing Plugs / Expanding Bungs

These are provided in sizes from 1.5", for more strenuous effort oriented duties such as long immersion in water and higher temperature. The plugs are merely inserted into the pipe and the wings tightened to force the top and bottom plates together, thereby expanding the rubber ring to seal tightly in the pipe.

These are used for pressure testing and stopping all pipework from 1.5 inch (38 mm) upwards. They are manufactured with ½", 1” and 2" outlets as shown in the chart overleaf. The standard seals are made from natural rubber and special rubber seals are available for chemical applications where greater resistance is required. All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.

Technical information for Steel Test Plugs
Model	Size (inches )	Expansion range (mm)	Pressure (bar)	Weight ( kgs )
STL01	1.5	38-50	1 to 3	0.25
STL02	2	49-60	1 to 3	0.25
STL03	2.5	62-75	2	0.3
STL04	3	73-85	1	0.3
STL05	3.5	84-95	1	0.3
STL06	4	94-110	1	0.3
STL07	6	146-163	0.6	0.6
STL08	7	170-195	0.3	1
STL09	8	192-212	0.3	1.4
STL10	9	216-235	0.3	2
STL11	10	244-260	0.3	2.2
STL12	12	275-305	0.3	3.5
STL13	14	340-375	0.3	4.3
STL14	15	365-400	0.3	4.5
STL15	16	390-425	0.3	6
STL16	18	440-475	0.3	7.4

Applications :

Aluminium Pipe Plugs are suitable for low pressure testing or temporary closure and have traditionally been used for basic low pressure air or water testing of sewer or water pipes, maintenance in ground works and they are increasingly used for applications in the offshore industry.
Topside applications in the offshore industry include:
• Temporary sealing gas of fuel pipes during hot work.
• General maintenance.
• Diving contractors finding subsea uses.

These combine with the traditional uses for domestic and industrial plumbing operations in blocking off water and drainage systems and testing during emergency problems or maintenance.
They are also used for ducting and conduits, swimming pools, masking in painting and casting industries, for leak testing, isolation, sealing, stopping and purging pipework. When transporting large vessels and tanks, such as heat exchangers, fractionation columns, shells for other petrochemical applications etc., Aluminium Plugs are used for sealing stubs and entries for interconnecting pipework so that the vessels can be sealed, with inert gas inside if necessary, to prevent oxidation or contamination during transportation.
In particular Aluminium Test Plugs are suitable for arduous duties such as immersion in chemicals and use at higher temperatures. For more complex applications, chemical and higher temperature resistant seals are available.

Indian Market

Jammu, Kota, Jalandhar, Jabalpur, Mumbai, Hyderabad, Bareilly, Varanasi, Kolhapur, Pune, Vadodara, Kanpur, Tiruchirappalli, Salem, Nashik, Jaipur, Kolkata, Surat, Delhi, Gorakhpur, Kozhikode, Aligarh, Amravati, Ghaziabad, Bhiwandi, Jamshedpur, Bengaluru, Aurangabad, Ahmedabad, Indore, Hubli Dhanbad, Thiruvanathpuram, Guntur,Guwahati,Patna, Nagpur, Warangal, Dhanbad, Faridabad, Belgaum, Dehradun, Madurai, Amritsar, Chennai, Chandigarh,Durg Bhilai, Meerut, Ludhina, Bhubaneswar, Asansol, Solapur, Agra, Rajkot, Coimbatore, Pondicherry, Bikaner, Bhopal, Moradabad, Vijayawada, Mysore, Allahabad, Cuttack, Jamnagar, Vishapatnam, Ranchi, Srinagar, Tiruppur, Lucknow, Mangalore, Jodhpur, Kochi, Gwalior, Raipur

International Market

Saudi Arabia, Kuwait, Bahrain , Algeria, Kenya, Tunisia, Angola,Morocco, Senegal, Egypt,Nigeria, Uganda, Libya, Liberia, Swaziland , Switzerland,Vatican City, Iceland, Sweden, Russia, Germany, Poland, Austria, Romania, Spain, Portugal, Hungary, United Kingdom, Denmark,Norway, Netherlands, Italy, Greece etc